4L/1.06Gal Dry Grain Mill Grinder, Hand Crank & Electric Adjustable Drill Grain Mill for Milling Barley Wheat Grains

SpecificationsColor: SilverStyle: ModernSpeed: ManualAssembly Required: YesMount Type: Bucket(Not Included)Recommended Uses For Product: GrindingMaterial: Carbon Steel, Stainless Steel, AluminumCapacity: 4L/1.06galDischarging Granularity: 0.2mmHopper Load Bearing: 4.99kg/11lbsAdjustable Distance Between Rollers: 0-2.5mm/0-0.098inchProduct Height: 26.6cm/10.47inchBase Size: 15.2*7.6cm/5.98*2.99inchRoller Size(L*D): 15*3.8cm/6*1.5inchFunnel Opening Size: 21.6*21.6cm/8.5*8.5inchCrank Handle: 11.4cm/4.49inchPackage Size: 23*29.5*15.5cm/9.06*11.61*6.1inGross Weight: 3.1kg/6.83lbsNet Weight: 2.95kg/6.5lbsPackage Included1*Grain Mill Grinder2*Aluminum StripsAll Needed AccessoriesNotes1. Please check the size carefully before ordering.Note: This product is not suitable for corn and can only be used for grains with a diameter less than 1.5mm.2. The product does not include an electric drill. You will need to supply or build a base to set the mill over a grain bin or 5-gallon bucket(not included).3. Please note that it is only used for grinding and crushing dry grains.4. If you receive the machine with oil, you can use a clean towel to wipe the machine, and then use some malt cereals to repeatedly grind 1-2 times, and finally wipe it clean.5. If rotating at high speeds, momentary jamming and stopping when there is debris can cause arm injuries.6. Please make sure it does not have friction with the internal rollers when the hopper is installed, if there is friction, please adjust the hopper manually.

• ADJUSTABLE ROLLER GAP - By adjusting the screws, the gap between the two rollers can be adjusted(0-2.5mm) to the right position for an even grinding effect with minimal husk damage.
• LARGE CAPACITY - The hopper boasts a 1.06 gal capacity and can hold up to 11 lbs grains of each time, largely improving productivity.
• 2 GRINDING METHODS - The grains grinder mill can be installed with a crank handle for manual grinding or with a corded electric drill(not included) for fast grinding to meet your different needs.
• SIMPLE OPERATION - After installation, you just need to pour grains into the hopper and start to roll the handle to grind the grains. The crankshaft can be driven clockwise and counterclockwise without affecting grinding.
• PLEASE NOTE - This mill grinder is not suitable for corn and can only be used for grains with a diameter less than 1.5mm. it is only used for grinding and crushing dry grains.